Paintless dent removal, usually called PDR, takes dents out of a panel without filler or paint. Your car keeps its original factory finish, and the repair is usually quicker and cheaper than a paint repair. But not every dent is suitable. Here’s how to tell whether yours is.

How PDR works

With classic PDR, specialist rods are worked in behind the panel to gently push the metal back into shape. Where there’s no access behind the panel, glue pull repair (GPR) is used instead: tabs are bonded to the outside of the dent and pulled out with a special tool, then the glue is removed. Either way, no paint is involved.

Five questions to check your dent

1. Is the paint broken?

This is the big one. If the paint is cracked, chipped or scratched inside the dent, PDR alone won’t fix it. The dent can often still be pulled out, but the area will then need a paint repair.

2. How sharp is the dent?

Soft, round dents like car park dings and hail dents are ideal. Sharp creases, where the metal has been stretched, are harder and may not come out completely.

3. Where is it?

Dents in the flat middle of a door or wing are usually straightforward. Dents right on a panel edge or a sharp body line are trickier, and some can’t be fully removed.

4. How big is it?

Size matters less than shape. A large, shallow dent can come out well, while a small but deep, sharp dent may not.

5. What is the panel made of?

Steel panels are the most forgiving. Aluminium panels, common on some premium cars, can still be repaired but need more care. Plastic bumpers are a different job altogether, usually handled with heat and reshaping or a bumper repair.

Why choose PDR when it’s possible?

  • Your original paint stays intact, which matters for resale and lease returns
  • No colour matching, so no risk of a visible repair
  • Usually finished in a single visit
  • Usually cheaper than filling and painting

What if PDR isn’t suitable?

If the paint is damaged or the dent is too sharp, the usual fix is to reshape the panel as far as possible, then carry out a SMART repair to fill and refinish the area. It takes a little longer but still avoids a full panel respray.

Getting a straight answer

Photograph the dent from a low angle, so the light shows its shape, and take one of the whole panel. From that, a PDR technician can usually tell you whether it’s suitable before coming out. See our paintless dent removal page for more on how we do it.

Need a hand?

Shivers Vehicle Services is a mobile car body repair specialist based in Macclesfield, covering Wilmslow, Alderley Edge, Knutsford, Congleton, Bramhall, Poynton, Altrincham, Stockport and the rest of Cheshire. Send a couple of photos by WhatsApp to 07701 085553 or send an enquiry for a free, no-obligation quote.